In statistics, the false discovery rate (FDR) is a method of conceptualizing the rate of type I errors in null hypothesis testing when conducting multiple comparisons. FDR-controlling procedures are designed to control the FDR, which is the expected proportion of "discoveries" (rejected null hypotheses) that are false (incorrect rejections of the null).[1] Equivalently, the FDR is the expected ratio of the number of false positive classifications (false discoveries) to the total number of positive classifications (rejections of the null). The total number of rejections of the null include both the number of false positives (FP) and true positives (TP). Simply put, FDR = FP / (FP + TP). FDR-controlling procedures provide less stringent control of Type I errors compared to family-wise error rate (FWER) controlling procedures (such as the Bonferroni correction), which control the probability of at least one Type I error. Thus, FDR-controlling procedures have greater power, at the cost of increased numbers of Type I errors.[2]

History edit

Technological motivations edit

The modern widespread use of the FDR is believed to stem from, and be motivated by, the development in technologies that allowed the collection and analysis of a large number of distinct variables in several individuals (e.g., the expression level of each of 10,000 different genes in 100 different persons).[3] By the late 1980s and 1990s, the development of "high-throughput" sciences, such as genomics, allowed for rapid data acquisition. This, coupled with the growth in computing power, made it possible to seamlessly perform a very high number of statistical tests on a given data set. The technology of microarrays was a prototypical example, as it enabled thousands of genes to be tested simultaneously for differential expression between two biological conditions.[4]

As high-throughput technologies became common, technological and/or financial constraints led researchers to collect datasets with relatively small sample sizes (e.g. few individuals being tested) and large numbers of variables being measured per sample (e.g. thousands of gene expression levels). In these datasets, too few of the measured variables showed statistical significance after classic correction for multiple tests with standard multiple comparison procedures. This created a need within many scientific communities to abandon FWER and unadjusted multiple hypothesis testing for other ways to highlight and rank in publications those variables showing marked effects across individuals or treatments that would otherwise be dismissed as non-significant after standard correction for multiple tests. In response to this, a variety of error rates have been proposed—and become commonly used in publications—that are less conservative than FWER in flagging possibly noteworthy observations. The FDR is useful when researchers are looking for "discoveries" that will give them followup work (E.g.: detecting promising genes for followup studies), and are interested in controlling the proportion of "false leads" they are willing to accept.

Literature edit

The FDR concept was formally described by Yoav Benjamini and Yosef Hochberg in 1995[1] (BH procedure) as a less conservative and arguably more appropriate approach for identifying the important few from the trivial many effects tested. The FDR has been particularly influential, as it was the first alternative to the FWER to gain broad acceptance in many scientific fields (especially in the life sciences, from genetics to biochemistry, oncology and plant sciences).[3] In 2005, the Benjamini and Hochberg paper from 1995 was identified as one of the 25 most-cited statistical papers.[5]

Prior to the 1995 introduction of the FDR concept, various precursor ideas had been considered in the statistics literature. In 1979, Holm proposed the Holm procedure,[6] a stepwise algorithm for controlling the FWER that is at least as powerful as the well-known Bonferroni adjustment. This stepwise algorithm sorts the p-values and sequentially rejects the hypotheses starting from the smallest p-values.

Benjamini (2010) said that the false discovery rate,[3] and the paper Benjamini and Hochberg (1995), had its origins in two papers concerned with multiple testing:

  • The first paper is by Schweder and Spjotvoll (1982) who suggested plotting the ranked p-values and assessing the number of true null hypotheses ( ) via an eye-fitted line starting from the largest p-values.[7] The p-values that deviate from this straight line then should correspond to the false null hypotheses. This idea was later developed into an algorithm and incorporated the estimation of   into procedures such as Bonferroni, Holm or Hochberg.[8] This idea is closely related to the graphical interpretation of the BH procedure.
  • The second paper is by Branko Soric (1989) which introduced the terminology of "discovery" in the multiple hypothesis testing context.[9] Soric used the expected number of false discoveries divided by the number of discoveries   as a warning that "a large part of statistical discoveries may be wrong". This led Benjamini and Hochberg to the idea that a similar error rate, rather than being merely a warning, can serve as a worthy goal to control.

The BH procedure was proven to control the FDR for independent tests in 1995 by Benjamini and Hochberg.[1] In 1986, R. J. Simes offered the same procedure as the "Simes procedure", in order to control the FWER in the weak sense (under the intersection null hypothesis) when the statistics are independent.[10]

Definitions edit

Based on definitions below we can define Q as the proportion of false discoveries among the discoveries (rejections of the null hypothesis):

 .

where   is the number of false discoveries and   is the number of true discoveries.

The false discovery rate (FDR) is then simply:[1]

 

where   is the expected value of  . The goal is to keep FDR below a given threshold q. To avoid division by zero,   is defined to be 0 when  . Formally,  .[1]

Classification of multiple hypothesis tests edit

The following table defines the possible outcomes when testing multiple null hypotheses. Suppose we have a number m of null hypotheses, denoted by: H1H2, ..., Hm. Using a statistical test, we reject the null hypothesis if the test is declared significant. We do not reject the null hypothesis if the test is non-significant. Summing each type of outcome over all Hi  yields the following random variables:

Null hypothesis is true (H0) Alternative hypothesis is true (HA) Total
Test is declared significant V S R
Test is declared non-significant U T  
Total     m

In m hypothesis tests of which   are true null hypotheses, R is an observable random variable, and S, T, U, and V are unobservable random variables.

Controlling procedures edit

The settings for many procedures is such that we have   null hypotheses tested and   their corresponding p-values. We list these p-values in ascending order and denote them by  . A procedure that goes from a small test-statistic to a large one will be called a step-up procedure. In a similar way, in a "step-down" procedure we move from a large corresponding test statistic to a smaller one.

Benjamini–Hochberg procedure edit

 
The Benjamini-Hochberg procedure applied to a set of m = 20 ascendingly ordered pvalues, with a false discovery control level α = 0.05. The p-values of the rejected null hypothesis (i.e. declared discoveries) are colored in red. Note that there are rejected p-values which are above the rejection line (in blue) since all null hypothesis of p-values which are ranked before the pvalue of the last intersection are rejected

The Benjamini–Hochberg procedure (BH step-up procedure) controls the FDR at level  .[1] It works as follows:

  1. For a given  , find the largest k such that  
  2. Reject the null hypothesis (i.e., declare discoveries) for all   for  

Geometrically, this corresponds to plotting   vs. k (on the y and x axes respectively), drawing the line through the origin with slope   , and declaring discoveries for all points on the left, up to, and including the last point that is below the line.

The BH procedure is valid when the m tests are independent, and also in various scenarios of dependence, but is not universally valid.[11] It also satisfies the inequality:

 

If an estimator of   is inserted into the BH procedure, it is no longer guaranteed to achieve FDR control at the desired level.[3] Adjustments may be needed in the estimator and several modifications have been proposed.[12][13][14][15]

Note that the mean   for these m tests is  , the Mean(FDR  ) or MFDR,   adjusted for m independent or positively correlated tests (see AFDR below). The MFDR expression here is for a single recomputed value of   and is not part of the Benjamini and Hochberg method.

Benjamini–Yekutieli procedure edit

The Benjamini–Yekutieli procedure controls the false discovery rate under arbitrary dependence assumptions.[11] This refinement modifies the threshold and finds the largest k such that:

 
  • If the tests are independent or positively correlated (as in Benjamini–Hochberg procedure):  
  • Under arbitrary dependence (including the case of negative correlation), c(m) is the harmonic number:  .
Note that   can be approximated by using the Taylor series expansion and the Euler–Mascheroni constant ( ):
 

Using MFDR and formulas above, an adjusted MFDR (or AFDR) is the minimum of the mean   for m dependent tests, i.e.,  . Another way to address dependence is by bootstrapping and rerandomization.[4][16][17]

Storey-Tibshirani procedure edit

 
Schematic representation of the Storey-Tibshirani procedure for correcting for multiple hypothesis testing, assuming correctly calculated p-values. y-axis is frequency.

In the Storey-Tibshirani procedure, q-values are used for controlling the FDR.

Properties edit

Adaptive and scalable edit

Using a multiplicity procedure that controls the FDR criterion is adaptive and scalable. Meaning that controlling the FDR can be very permissive (if the data justify it), or conservative (acting close to control of FWER for sparse problem) - all depending on the number of hypotheses tested and the level of significance.[3]

The FDR criterion adapts so that the same number of false discoveries (V) will have different implications, depending on the total number of discoveries (R). This contrasts with the family-wise error rate criterion. For example, if inspecting 100 hypotheses (say, 100 genetic mutations or SNPs for association with some phenotype in some population):

  • If we make 4 discoveries (R), having 2 of them be false discoveries (V) is often very costly. Whereas,
  • If we make 50 discoveries (R), having 2 of them be false discoveries (V) is often not very costly.

The FDR criterion is scalable in that the same proportion of false discoveries out of the total number of discoveries (Q), remains sensible for different number of total discoveries (R). For example:

  • If we make 100 discoveries (R), having 5 of them be false discoveries ( ) may not be very costly.
  • Similarly, if we make 1000 discoveries (R), having 50 of them be false discoveries (as before,  ) may still not be very costly.

Dependency among the test statistics edit

Controlling the FDR using the linear step-up BH procedure, at level q, has several properties related to the dependency structure between the test statistics of the m null hypotheses that are being corrected for. If the test statistics are:

  • Independent:[11]  
  • Independent and continuous:[1]  
  • Positive dependent:[11]  
  • In the general case:[11]   , where   is the Euler–Mascheroni constant.

Proportion of true hypotheses edit

If all of the null hypotheses are true ( ), then controlling the FDR at level q guarantees control over the FWER (this is also called "weak control of the FWER"):  , simply because the event of rejecting at least one true null hypothesis   is exactly the event  , and the event   is exactly the event   (when  ,   by definition).[1] But if there are some true discoveries to be made ( ) then FWER ≥ FDR. In that case there will be room for improving detection power. It also means that any procedure that controls the FWER will also control the FDR.

Average power edit

The average power of the Benjamini-Hochberg procedure can be computed analytically[18]

Related concepts edit

The discovery of the FDR was preceded and followed by many other types of error rates. These include:

  • PCER (per-comparison error rate) is defined as:  . Testing individually each hypothesis at level α guarantees that   (this is testing without any correction for multiplicity)
  • FWER (the family-wise error rate) is defined as:  . There are numerous procedures that control the FWER.
  •   (The tail probability of the False Discovery Proportion), suggested by Lehmann and Romano, van der Laan at al,[citation needed] is defined as:  .
  •   (also called the generalized FDR by Sarkar in 2007[19][20]) is defined as:  .
  •   is the proportion of false discoveries among the discoveries", suggested by Soric in 1989,[9] and is defined as:  . This is a mixture of expectations and realizations, and has the problem of control for  .[1]
  •  (or Fdr) was used by Benjamini and Hochberg,[3] and later called "Fdr" by Efron (2008) and earlier.[21] It is defined as:  . This error rate cannot be strictly controlled because it is 1 when  .
  •   was used by Benjamini and Hochberg,[3] and later called "pFDR" by Storey (2002).[22] It is defined as:  . This error rate cannot be strictly controlled because it is 1 when  . JD Storey promoted the use of the pFDR (a close relative of the FDR), and the q-value, which can be viewed as the proportion of false discoveries that we expect in an ordered table of results, up to the current line.[citation needed] Storey also promoted the idea (also mentioned by BH) that the actual number of null hypotheses,  , can be estimated from the shape of the probability distribution curve. For example, in a set of data where all null hypotheses are true, 50% of results will yield probabilities between 0.5 and 1.0 (and the other 50% will yield probabilities between 0.0 and 0.5). We can therefore estimate   by finding the number of results with   and doubling it, and this permits refinement of our calculation of the pFDR at any particular cut-off in the data-set.[22]
  • False exceedance rate (the tail probability of FDP), defined as:[23]  
  •   (Weighted FDR). Associated with each hypothesis i is a weight  , the weights capture importance/price. The W-FDR is defined as:  .
  • FDCR (False Discovery Cost Rate). Stemming from statistical process control: associated with each hypothesis i is a cost   and with the intersection hypothesis   a cost  . The motivation is that stopping a production process may incur a fixed cost. It is defined as:  
  • PFER (per-family error rate) is defined as:  .
  • FNR (False non-discovery rates) by Sarkar; Genovese and Wasserman[citation needed] is defined as:  
  •   is defined as:  
  •   The local fdr is defined as:  

False coverage rate edit

The false coverage rate (FCR) is, in a sense, the FDR analog to the confidence interval. FCR indicates the average rate of false coverage, namely, not covering the true parameters, among the selected intervals. The FCR gives a simultaneous coverage at a   level for all of the parameters considered in the problem. Intervals with simultaneous coverage probability 1−q can control the FCR to be bounded by q. There are many FCR procedures such as: Bonferroni-Selected–Bonferroni-Adjusted,[citation needed] Adjusted BH-Selected CIs (Benjamini and Yekutieli (2005)),[24] Bayes FCR (Yekutieli (2008)),[citation needed] and other Bayes methods.[25]

Bayesian approaches edit

Connections have been made between the FDR and Bayesian approaches (including empirical Bayes methods),[21][26][27] thresholding wavelets coefficients and model selection,[28][29][30][31] and generalizing the confidence interval into the false coverage statement rate (FCR).[24]

See also edit

References edit

  1. ^ a b c d e f g h i Benjamini Y, Hochberg Y (1995). "Controlling the false discovery rate: a practical and powerful approach to multiple testing". Journal of the Royal Statistical Society, Series B. 57 (1): 289–300. MR 1325392.
  2. ^ Shaffer, J P (January 1995). "Multiple Hypothesis Testing". Annual Review of Psychology. 46 (1): 561–584. doi:10.1146/annurev.ps.46.020195.003021. S2CID 7696063. Gale A16629837.
  3. ^ a b c d e f g Benjamini Y (2010). "Discovering the false discovery rate". Journal of the Royal Statistical Society, Series B. 72 (4): 405–416. doi:10.1111/j.1467-9868.2010.00746.x.
  4. ^ a b Storey JD, Tibshirani R (August 2003). "Statistical significance for genomewide studies". Proceedings of the National Academy of Sciences of the United States of America. 100 (16): 9440–5. Bibcode:2003PNAS..100.9440S. doi:10.1073/pnas.1530509100. PMC 170937. PMID 12883005.
  5. ^ Ryan TP, Woodall WH (2005). "The most-cited statistical papers". Journal of Applied Statistics. 32 (5): 461–474. doi:10.1080/02664760500079373. S2CID 109615204.
  6. ^ Holm S (1979). "A simple sequentially rejective multiple test procedure". Scandinavian Journal of Statistics. 6 (2): 65–70. JSTOR 4615733. MR 0538597.
  7. ^ Schweder T, Spjøtvoll E (1982). "Plots of P-values to evaluate many tests simultaneously". Biometrika. 69 (3): 493–502. doi:10.1093/biomet/69.3.493.
  8. ^ Hochberg Y, Benjamini Y (July 1990). "More powerful procedures for multiple significance testing". Statistics in Medicine. 9 (7): 811–8. doi:10.1002/sim.4780090710. PMID 2218183.
  9. ^ a b Soric B (June 1989). "Statistical "Discoveries" and Effect-Size Estimation". Journal of the American Statistical Association. 84 (406): 608–610. doi:10.1080/01621459.1989.10478811. JSTOR 2289950.
  10. ^ Simes RJ (1986). "An improved Bonferroni procedure for multiple tests of significance". Biometrika. 73 (3): 751–754. doi:10.1093/biomet/73.3.751.
  11. ^ a b c d e Benjamini Y, Yekutieli D (2001). "The control of the false discovery rate in multiple testing under dependency". Annals of Statistics. 29 (4): 1165–1188. doi:10.1214/aos/1013699998. MR 1869245.
  12. ^ Storey JD, Taylor JE, Siegmund D (2004). "Strong control, conservative point estimation and simultaneous conservative consistency of false discovery rates: A unified approach". Journal of the Royal Statistical Society, Series B. 66: 187–205. doi:10.1111/j.1467-9868.2004.00439.x. S2CID 12646251.
  13. ^ Benjamini Y, Krieger AM, Yekutieli D (2006). "Adaptive linear step-up procedures that control the false discovery rate". Biometrika. 93 (3): 491–507. doi:10.1093/biomet/93.3.491.
  14. ^ Gavrilov Y, Benjamini Y, Sarkar SK (2009). "An adaptive step-down procedure with proven FDR control under independence". The Annals of Statistics. 37 (2): 619. arXiv:0903.5373. doi:10.1214/07-AOS586. S2CID 16913244.
  15. ^ Blanchard G, Roquain E (2008). "Two simple sufficient conditions for FDR control". Electronic Journal of Statistics. 2: 963–992. arXiv:0802.1406. doi:10.1214/08-EJS180. S2CID 16662020.
  16. ^ Yekutieli D, Benjamini Y (1999). "Resampling based False Discovery Rate controlling procedure for dependent test statistics". J. Statist. Planng Inf. 82 (1–2): 171–196. doi:10.1016/S0378-3758(99)00041-5.
  17. ^ van der Laan MJ, Dudoit S (2007). Multiple Testing Procedures with Applications to Genomics. New York: Springer.
  18. ^ Glueck, Deborah H; Mandel, Jan; Karimpour-Fard, Anis; Hunter, Lawrence; Muller, Keith E (30 January 2008). "Exact Calculations of Average Power for the Benjamini-Hochberg Procedure". The International Journal of Biostatistics. 4 (1): Article 11. doi:10.2202/1557-4679.1103. PMC 3020656. PMID 21243075.
  19. ^ Sarkar SK (2007). "Stepup procedures controlling generalized FWER and generalized FDR". The Annals of Statistics. 35 (6): 2405–20. arXiv:0803.2934. doi:10.1214/009053607000000398. S2CID 14784911.
  20. ^ Sarkar SK, Guo W (June 2009). "On a generalized false discovery rate". The Annals of Statistics. 37 (3): 1545–65. arXiv:0906.3091. doi:10.1214/08-AOS617. JSTOR 30243677. S2CID 15746841.
  21. ^ a b Efron B (2008). "Microarrays, empirical Bayes and the two groups model". Statistical Science. 23: 1–22. arXiv:0808.0603. doi:10.1214/07-STS236. S2CID 8417479.
  22. ^ a b Storey JD (2002). "A direct approach to false discovery rates" (PDF). Journal of the Royal Statistical Society, Series B. 64 (3): 479–498. CiteSeerX 10.1.1.320.7131. doi:10.1111/1467-9868.00346. S2CID 122987911.
  23. ^ Benjamini Y (December 2010). "Simultaneous and selective inference: Current successes and future challenges". Biometrical Journal. Biometrische Zeitschrift. 52 (6): 708–21. doi:10.1002/bimj.200900299. PMID 21154895. S2CID 8806192.
  24. ^ a b Benjamini Y, Yekutieli Y (2005). "False discovery rate controlling confidence intervals for selected parameters". Journal of the American Statistical Association. 100 (469): 71–80. doi:10.1198/016214504000001907. S2CID 23202143.
  25. ^ Zhao Z, Gene Hwang JT (2012). "Empirical Bayes false coverage rate controlling confidence intervals". Journal of the Royal Statistical Society, Series B. 74 (5): 871–891. doi:10.1111/j.1467-9868.2012.01033.x. hdl:10.1111/j.1467-9868.2012.01033.x. S2CID 111420152.
  26. ^ Storey JD (2003). "The positive false discovery rate: A Bayesian interpretation and the q-value". Annals of Statistics. 31 (6): 2013–2035. doi:10.1214/aos/1074290335.
  27. ^ Efron B (2010). Large-Scale Inference. Cambridge University Press. ISBN 978-0-521-19249-1.
  28. ^ Abramovich F, Benjamini Y, Donoho D, Johnstone IM (2006). "Adapting to unknown sparsity by controlling the false discovery rate". Annals of Statistics. 34 (2): 584–653. arXiv:math/0505374. Bibcode:2005math......5374A. doi:10.1214/009053606000000074. S2CID 7581060.
  29. ^ Donoho D, Jin J (2006). "Asymptotic minimaxity of false discovery rate thresholding for sparse exponential data". Annals of Statistics. 34 (6): 2980–3018. arXiv:math/0602311. Bibcode:2006math......2311D. doi:10.1214/009053606000000920. S2CID 9080115.
  30. ^ Benjamini Y, Gavrilov Y (2009). "A simple forward selection procedure based on false discovery rate control". Annals of Applied Statistics. 3 (1): 179–198. arXiv:0905.2819. Bibcode:2009arXiv0905.2819B. doi:10.1214/08-AOAS194. S2CID 15719154.
  31. ^ Donoho D, Jin JS (2004). "Higher criticism for detecting sparse heterogeneous mixtures". Annals of Statistics. 32 (3): 962–994. arXiv:math/0410072. Bibcode:2004math.....10072D. doi:10.1214/009053604000000265. S2CID 912325.

External links edit