, a filter
is a camera
accessory consisting of an optical filter
that can be inserted into the optical path
. The filter can be of a square or oblong shape and mounted in a holder accessory, or, more commonly, a glass or plastic disk in a metal or plastic ring frame, which can be screwed into the front of or clipped onto the camera lens
Filters modify the images recorded. Sometimes they are used to make only subtle changes to images; other times the image would simply not be possible without them. In monochrome photography
, coloured filters affect the relative brightness of different colours; red lipstick may be rendered as anything from almost white to almost black with different filters. Others change the colour balance
of images, so that photographs under incandescent lighting show colours as they are perceived, rather than with a reddish tinge. There are filters that distort the image in a desired way, diffusing an otherwise sharp image, adding a starry effect, etc. Linear and circular polarising filters reduce oblique reflections from non-metallic surfaces.
Many filters absorb part of the light available, necessitating longer exposure. As the filter is in the optical path, any imperfections—non-flat or non-parallel surfaces, reflections (minimised by optical coating), scratches, dirt—affect the image.
There is no universal standard naming system for filters. The Wratten numbers
adopted in the early twentieth century by Kodak
, then a dominant force in film photography, are used by several manufacturers. Colour correction
filters are often identified by a code of the form CC50Y—CC for colour correction, 50 for the strength of the filter, Y for yellow.
Optical filters are used in various areas of science, including in particular astronomy
; they are essentially the same as photographic filters, but in practice often need far more accurately controlled optical properties and precisely defined transmission curves
than filters exclusively for photographic use. Photographic filters sell in larger quantities at correspondingly lower prices than many laboratory filters. The article on optical filters has material relevant to photographic filters.
photography the majority of filters used with film cameras have been rendered redundant by digital filters applied either in-camera or during post processing. Exceptions include the ultraviolet (UV) filter typically used to protect the front surface of the lens, the neutral density (ND) filter, the polarising filter and the infra red (IR) filter. The neutral density filter permits effects requiring wide apertures or long exposures to be applied to brightly lit scenes, while the graduated neutral density filter is useful in situations where the scene's dynamic range
exceeds the capability of the sensor. Not using optical filters in front of the lens has the advantage of avoiding the reduction of image quality caused by the presence of an extra optical element in the light path and may be necessary to avoid vignetting
when using wide-angle lenses.
Filters in photography can be classified according to their use:
Clear and ultraviolet
Clear filters, also known as window glass filters or optical flats, are transparent and (ideally) perform no filtering of incoming light. The only use of a clear filter is to protect the front of a lens.
Clear glass will absorb some UV.
are used to block invisible ultraviolet
light, to which most photographic sensors and film are at least slightly sensitive. The UV is typically recorded as if it were blue light, so this non-human UV sensitivity can result in an unwanted exaggeration of the bluish tint of atmospheric haze or, even more unnaturally, of subjects in open shade lit by the ultraviolet-rich sky.
Normally, the glass or plastic of a camera lens is practically opaque to short-wavelength UV, but transparent to long-wavelength (near-visible) UV. A UV filter
passes all or nearly all of the visible spectrum
but blocks virtually all ultraviolet radiation. (Most spectral manipulation filters are named for the radiation they pass; green and infrared filters pass
their named colors, but a UV filter blocks
UV.) It can be left on the lens for nearly all shots: UV filters are often used mainly for lens protection in the same way as clear filters. A strong UV filter, such as a Haze-2A or UV17, cuts off some visible light in the violet part of the spectrum, and has a pale yellow color; these strong filters are more effective at cutting haze,
and can reduce purple fringing
in digital cameras
Strong UV filters are also sometimes used for warming color photos taken in shade with daylight-type film.
An extreme case: a Nikon D700 with a smashed filter which may have saved the Nikkor lens beneath. Usually, all that can reasonably be expected is protection from scratches, nicks and airborne contaminants.
While in certain cases, such as harsh environments, a protection filter may be necessary, there are also downsides to this practice. Arguments for the use of protection filters include:
- If the lens is dropped, the filter may well suffer scratches or breakage instead of the front lens element.
- The filter can be cleaned frequently without damage to the lens surface or coatings; a filter scratched by cleaning is much less expensive to replace than a lens.
- If there is blowing sand the filter will protect the front of the lens from abrasion and nicks.
- A few lenses, such as some of Canon's L series lenses, require the use of a filter to complete their weather sealing.
Arguments against their use include:
- Adding another element may degrade image quality if its surfaces are less than perfectly flat and parallel. Filters from reputable makers are very unlikely to cause any problems, but some "bargain" products are optically inferior.
- The two additional reflections at air-glass interfaces inevitably result in some light loss—at least four percent at each interface, if the surfaces are uncoated; they also increase the potential for lens flare problems.
- Low-quality filters may cause problems with autofocus.
- A filter may be incompatible with the use of a lens hood, since not all filters have the required threading for a screw-in hood or will allow a clip-on hood to be attached. Adding a lens hood on top of one or more filters may space the hood away from the lens enough to cause some vignetting.
There is a wide variation in the spectral UV blocking by filters described as ultraviolet.
Appropriate color conversion filters are used to compensate for the effects of lighting not balanced for the film stock's rated color temperature
(usually 3200 K for professional tungstens
and 5500 K for daylight): e.g., the 80A blue filter
used with film for daylight use corrects the perceived orange/reddish cast of incandescent photographic photoflood
lighting (for which the usual photographic term is "tungsten lighting
"), and significantly improves the stronger cast produced by lower-temperature household incandescent lighting
, while the 85B
will correct the bluish cast of daylight photographs on tungsten film
. Color correction filters are identified by non-standardised numbers which vary from manufacturer to manufacturer. The need for these filters has been greatly reduced by the widespread adoption of digital photography, since color balance may be corrected with camera settings as the image is captured, or by software manipulation afterwards.
The 80A filter, mainly used to correct for the excessive redness of tungsten
lighting, can also be used to oversaturate scenes that already have blue. The photo on the left was shot with a polarizer, while the one on the right was shot with a polarizer and an 80A filter.
Color conversion filters (LB filters) must be distinguished from color correction filters (CC filters), which filter out a particular color cast f.e. caused by Schwarzschild effect etc.
filters work by absorbing certain colors of light, letting the remaining colors through. They can be used to demonstrate the primary colors that make up an image. They are perhaps most frequently used in the printing
industry for color separations
, and again, use has diminished as digital solutions have become more advanced and abundant. Didymium filters
, sold as "color enhancement" or "fall color" filters act similarly: They remove a narrow (or broad) band of color in the yellow part of the spectrum (589 nm
Some astronomical filters
similarly use didymium
in heavier concentration. Even astronomical filters
which don't use didymium typically are some kind of narrow pass-band color filter.
Colored filters are commonly used in black and white
photography to alter the effect of different colors in the scene, changing contrast
recorded in black and white of the different colours. For example, a yellow or, more dramatically, orange or red, filter will enhance the contrast between clouds and sky by darkening the blue sky. A deep green filter will also darken the sky, and additionally lighten green foliage, making it stand out against the sky. A blue filter mimics the effect of older orthochromatic
film, or even older film sensitive only to blue light, rendering blue as light and red and green as dark, showing blue skies as overcast with no contrast between sky and clouds, darkening blond hair, making blue eyes nearly white and red lips nearly black. Diffusion filters
reduce contrast in addition to softening resolution.
Effects of using a polarizer and a red filter in black-and-white photography
Polarizing filter, Atlantic Ocean 1989
A polarizing filter
, used for both color
and black-and-white photography
, is colourless and does not affect colour balance, but filters out light with a particular direction of polarisation
. This reduces oblique reflections from non-metallic surfaces, can darken the sky in colour photography (in monochrome photography colour filters are more effective), and can saturate the image more by eliminating unwanted reflections.
Linear polarising filters, while effective, can interfere with metering and auto-focus mechanisms when mirrors or beam-splitters are in the light path, as in the digital single lens reflex camera
; a circular polarizer
is also effective, and does not affect metering or auto-focus.
A neutral density filter
(ND filter) is a filter of uniform density which attenuates light of all colors equally. It is used to allow a longer exposure (to create blur) or larger aperture (for selective focus) than otherwise required for correct exposure in the prevailing light conditions, without changing the tonal balance of the photograph.
A graduated neutral density filter
is a neutral density filter with different attenuation at different points, typically clear in one half shading into a higher density in the other. It can be used, for example, to photograph a scene with part in deep shadow and part brightly lit, where otherwise either the shadows would have no detail or the highlights would be burnt out.
A cross screen filter
, also known as a star filter
, creates a star pattern, in which lines radiate outward from bright objects. The star pattern is generated by a very fine diffraction
grating embedded in the filter, or sometimes by the use of prisms
in the filter. The number of stars varies by the construction of the filter, as does the number of points each star has.
The bottom left image has a diffusion filter applied to the original image (shown in the top left). The top right is a cross screen effect. The bottom right shows a LOMO[b]
A diffusion filter
(also called a softening filter
) softens subjects and generates a dreamy haze (see photon diffusion
). This is most often used for portraits. It also has the effect of reducing contrast, and the filters are designed, labeled, sold, and used for that purpose too. There are many ways of accomplishing this effect, and thus filters from different manufacturers vary significantly. The two primary approaches are to use some form of grid or netting in the filter, or to use something which is transparent but not optically sharp.
Both effects can be achieved in software, which can in principle provide a very precise degree of control of the level of effect, however the "look" may be noticeably different. If there is too much contrast in a scene, the dynamic range
of the digital image sensor
or film may be exceeded, which post-processing cannot compensate for, so contrast reduction at the time of image capture may be called for.
Close-up and split diopter lenses
A close-up lens is not technically a filter but accessory lens
which attaches to a lens like a filter, hence the alternative but misleading term "close-up filter". They are often sold by filter manufacturers as part of their product lines, using the same holders and attachment systems. A close-up lens is a single or two-element converging lens
used for close-up and macro photography
, and works in the same way as spectacles
used for reading. The insertion of a converging lens in front of the taking lens reduces the focal length
of the combination.
are usually specified by their optical power, the reciprocal
of the focal length in meters. Several close-up lenses may be used in combination; the optical power of the combination is the sum of the optical powers of the component lenses; a set of lenses of +1, +2, and +4 diopters can be combined to provide a range from +1 to +7 in steps of one.
A split diopter
has just a semicircular half of a close-up lens in a normal filter holder. It can be used to photograph a close object and a much more distant background, with everything in sharp focus; with any non-split lens the depth of field
would be far too shallow.
Materials and construction
Photo filters are commonly made from glass
plastics similar to those used for eyeglasses (such as CR-39
; sometimes acetate
is used. Historically, filters were often made from gelatin
, and color gels
. While some filters are still described as gelatin
filters, they are no longer actually made from gelatin but from one of the plastics mentioned above.
Sometimes the filter is dyed in the mass, in other cases the filter is a thin sheet of material sandwiched between two pieces of clear glass or plastic.
Certain kinds of filters use other materials inside a glass sandwich; for example, polarizers
often use various special films, netting filters have nylon
netting, and so forth.
The rings on screw-on filters are often made of aluminum, though in more expensive filters brass
is used. Aluminum filter rings are much lighter in weight, but can "bind" to the aluminum lens threads they are screwed in to, requiring the use of a filter wrench to get the filter off of the lens. Aluminum also dents or deforms more easily.
High quality filters are multi-coated,
with multiple-layer optical coatings
to reduce reflections. Uncoated filters can reflect up to 12% of the light,
single-coated filter can reduce this considerably, and multi-coated filters can allow up to 99.8% of the light to pass through (0.2% unwanted reflection); the loss of light is not important, but part of the light is reflected inside the camera, producing flare
and reducing the contrast of the image.
Filter sizes and mountings
Manufacturers of lenses and filters have standardized on several different sets of sizes over the years.
Threaded round filters
The most common standard filter sizes for circular filters include 30.5 mm, 35.5 mm, 37 mm, 39 mm, 40.5 mm, 43 mm, 46 mm, 49 mm, 52 mm, 55 mm, 58 mm, 62 mm, 67 mm, 72 mm, 77 mm, 82 mm, 86 mm, 95 mm, 105 mm, 112 mm 122 mm, 127 mm. The filter diameter has a steady increase from 43-58 mm every 3 mm and from 62-82 mm every 5 mm. Other filter sizes within this range may be hard to find since the filter size may be non-standard or may be rarely used on camera lenses. The specified diameter of the filter in millimeters indicates the diameter of the male threads on the filter housing. The thread pitch
is 0.5 mm, 0.75 mm or 1.0 mm, depending on the ring size. A few sizes (e.g. 30.5 mm) come in more than one pitch.
The filter diameter for a particular lens is commonly identified on the lens face by the ⌀
symbol. For example, a lens marking may indicate: “⌀55 mm” or “55⌀” meaning it would accept a 55 mm filter or lens hood
List of common objective filter threads
Table notes: ^a
Most often refers to 0.75 mm pitch thread, but an (incompatible) 1.0 mm pitch thread is sometimes used instead by some manufacturers.
For square filters, 2" × 2", 3" × 3" and 4" × 4" were historically very common and are still made by some manufacturers. 100 mm × 100 mm is very close to 4" × 4", allowing use of many of the same holders, and is one of the more popular sizes currently (2006) in use; it is virtually a standard in the motion picture
industry. 75 mm x 75 mm is very close to 3" × 3" and while less common today, was much in vogue in the 1990s.
The French manufacturer Cokin
makes a wide range of filters and holders in three sizes which is collectively known as the Cokin System
. "A" (amateur) size is 67 mm wide, “P” (professional) size is 84 mm wide, and “X Pro” is 130 mm wide. Many other manufacturers make filters to fit Cokin holders. Cokin also makes a filter holder for 100 mm filters, which they call the “Z” size. Most of Cokin's filters are made of optical resins such as CR-39. A few round filter elements may be attached to the square/rectangular filter holders, usually polarizers and gradient filters which both need to be rotated and are more expensive to manufacture.
Cokin formerly (1980s through mid-1990s) had competition from Hoya's 'Hoyarex' system (75 mm x 75 mm filters mostly made from resin) and also a range made by Ambico
, but both have withdrawn from the market. A small (84 mm) “system” range is still made (as of 2012) by Formatt Hitech.
In general, square (and sometimes rectangular) filters from one system could be used in another system’s holders if the size was correct, but each made a different system of filter holder which could not be used together. Lee, Tiffen, Formatt Hitech and Singh Ray also make square / rectangular filters in the 100 × 100 and Cokin “P” sizes.
Gel filters are very common in square form, rarely being used in circular form. These are thin flexible sheets of gelatin
or plastic which must be held in rigid frames to prevent them from sagging. Gels are made not only for use as photo filters, but also in a wide range of colors for use in lighting applications, particularly for theatrical lighting. Gel holders are available from all of the square “system” makers, but are additionally provided by many camera manufacturers, by manufacturers of gel filters, and by makers of expensive professional camera accessories (particularly those manufacturers which target the movie and television camera markets.
Square filter systems often have lens shades
available to attach to the filter holders.
Graduated filters of a given width (67 mm, 84 mm, 100 mm, etc.) are often made oblong, rather than square, in order to allow the position of the gradation to be moved up or down in the picture. This allows, for example, the red part of a sunset filter to be placed at the horizon. These are used with the "system" holders described above.
Bayonet round filters
Certain manufacturers, most notably Rollei
, have created their own systems of bayonet mount
for filters. Each design comes in several sizes, such as Bay I through Bay VIII for Rollei, and Bay 50 through Bay 104 for Hasselblad.
Starting in the 1930s, filters were also made in a sizing system known as a series mount. The filters themselves were round pieces of glass (or occasionally other materials) with no threads. Very early filters had no rims around the glass, but the more common later production filters had the glass mounted in metal rims. To mount the filters on a camera, the filter was placed between two rings; the mount ring either screwed into the lens threads or was slipped over the lens barrel and the retaining ring screws into the mounting ring to hold the filter in place. The series designations are generally written as Roman numerals
, I to IX, though there are a few sizes not written that way, such as Series 4.5 and Series 5.5. Most Series filter sizes are now obsolete, production having ceased by the late 1970s. However, Series 9 became a standard of the motion picture industry and Series 9 filters are still produced and sold today, particularly for professional motion picture cinematography.
- ^ The loss of some of the yellow light does not greatly affect humans' or cameras' ability perceive yellow colors, but does provide better color separation between shades of red, orange, and green. The greens look greener, the reds look redder, the oranges look redder, browns acquire a reddish tinge, and the yellows dim slightly. The net effect is to make the colors of autumn leaves 'pop'. Looking through a didymium filter at a familiar human environment makes many colors appear gaudy or cartoonish.
Some filter manufacturers add light color-correction coatings to help preserve white balance, or heavier coatings to exaggerate some colors (e.g. "green enhancing"). The yellow-blocking material used didymium is actually a naturally occurring mixture of two rare earths; by adjusting the mix of praseodymium and neodymium, and the amount of both in the glass, different degrees and intensities of color effects can be produced. Hence, different manufacturers' "color enhancement" filters can produce subtle through to garish effects.
As an example of manipulating the didymium mixture and amount, 'light pollution filters' used in amateur astronomy use a particularly heavy dose of didymium in the glass, in order to completely block parts of the spectrum typically dominated by light pollution from sodium-vapor lamps and mercury vapor lighting, while leaving colors of dim astronomical objects visible to the dark-adapted eye largely unaffected.
- ^ The LOMO effect imitates photos made with a low-cost Russian camera brand, named "LOMO". It is approximated by saturated central colors, blurred periphery, and darkened corners and edges (vignetting).
- ^ Seth Barton (January 9, 2014). "Sony FDR-AX100 review – Hands on with first consumer 4K camcorder".
- ^ "Camera Lens Filters". Retrieved January 17, 2014.
- ^ Joseph Meehan (1998). The Photographer's Guide to Using Filters. Watson-Guptill. ISBN 0-8174-5452-7.
- ^ Tiffen Inc. "Protection & UV Absorbing Filters". Retrieved 2011-04-12.
- ^ Gary Nugent. "Photoshop Technique: Remove Purple Fringing". Retrieved 2011-04-12.
- ^ Canon Inc. "Canon EF 16-35mm f/2.8L II USM Instruction Manual" (PDF). Canon Inc. p. ENG-1. Retrieved 2013-01-04. Since the front element of this lens moves when zooming, you need to attach a Canon PROTECT filter sold separately for adequate dust- and water-resistant performance. Without a filter, the lens is not dust or water resistant.
- ^ Canon Inc. "Canon EF 17-40mm f/4L USM Instruction Manual" (PDF). Canon Inc. p. ENG-1. Retrieved 2013-01-04. Since the front element of this lens moves when focusing (zooming), you need to attach a Canon PROTECT filter sold separately for adequate dust- and water-resistant performance. Without a filter, the lens is not dust or water-resistant.
- ^ Canon Inc. "Canon EF 50mm f/1.2L USM Instruction Manual" (PDF). Canon Inc. p. ENG-1. Retrieved 2013-01-04. Since the front element of this lens moves when focusing, you need to attach a Canon PROTECT filter sold separately for adequate dust- and water-resistant performance. Without a filter, the lens is not dust or water resistant.
- ^ Thom Hogan. "Filters by Thom Hogan". Archived from the original on 2007-08-23. Retrieved 2011-04-12.
- ^ Paul van Walree. "Filter Flare". Archived from the original on 2011-03-21. Retrieved 2011-04-12.
- ^ Bob Atkins. "UV or not UV?". Retrieved 2007-07-26.
- ^ Reichmann, Michael. "Polarizers". Retrieved 2011-08-19.
- ^ Dr. Ching-Kuang Shene. "Coated or Non-Coated?". Retrieved 2011-04-12.
- ^ Lenstip.com. "UV filters test - Tiffen 72mm UV". Retrieved 2011-04-12.
- ^ Formatt Hitech. "Format Hitech Still Filters". Archived from the original on 2012-09-20. Retrieved 2012-09-30.
- ^ filmtools.com, online catalog retrieved 2011-08-13
Last edited on 19 March 2021, at 14:53
Content is available under CC BY-SA 3.0
unless otherwise noted.