iPhone: About Connections Settings | |||||||||
Airplane ModeAirplane mode disables the wireless features of iPhone to avoid interfering with aircraft operation and other electrical equipment. Turn on airplane mode
Tap Settings and turn airplane mode on. When airplane mode is on, appears in the status bar at the top of the screen, and no cell phone, radio, Wi-Fi, or Bluetooth signals are emitted from iPhone. You can't make calls, send or receive text messages, stream YouTube videos, or get stock quotes, map locations, or weather reports. If allowed by the aircraft operator and applicable laws and regulations, you can continue to use iPhone: Wi-FiWi-Fi settings determine when iPhone uses local Wi-Fi networks to connect to the Internet. Tip: If no Wi-Fi networks are available, or you've turned Wi-Fi off, then iPhone connects to the Internet via EDGE. Turn Wi-Fi on or offChoose General > Network and turn Wi-Fi on or off. Set iPhone to ask if you want to join a new networkWhen you are trying to access the Internet, by using Safari or Mail for example, and you are not in danger of a Wi-Fi network you have previously used, this option tells iPhone to look for another network. iPhone displays a list of all available Wi-Fi networks that you can choose from. (Networks that required a password appear with a lock icon.) If "Ask to Join New Networks" is turned off, you must manually join a network to connect to the Internet when neither a previously used network nor EDGE is available. Choose Wi-Fi and turn "Ask to Join Networks" on or off. If you turn "Ask to Join Networks" off, you must join networks manually. Join a Wi-Fi network manuallyChoose Wi-Fi, wait a moment as iPhone detects networks in range, then choose a network. If necessary, enter a password and tap Join. (Networks that require a password appear with a lock icon.) Make iPhone forget a network, so iPhone doesn't join it automaticallyChoose Wi-Fi and tap next to a network you've joined before. Then tap "Forget this Network." Connect to a close Wi-Fi network (an available Wi-Fi network that isn't shown in the list of scanned networks)Choose Wi-Fi > Other and enter the network name. If the network requires a password, choose Security, tap the type of security the network uses, and enter the password. You must already know the network name, password, and security type to connect to a closed network. Some Wi-Fi networks may require you to enter or adjust additional settings, such as a client ID or static IP address. Ask the network administrator which settings to use. Adjust settings to connect to a Wi-Fi networkChoose Wi-Fi, then tap next to a network. BluetoothiPhone can connect wirelessly to Bluetooth headsets and car kits for hands-free talking. Turning Bluetooth on iPhone On or OffFrom the Home screen choose Settings > General > Bluetooth, then turn Bluetooth on or off. VPNVPNs (virtual private networks) are often used within organizations to allow you to communicate private information securely over a non-private network. You may need to configure VPN, for example, to access your work email on iPhone. iPhone can connect to VPNs that use the L2TP or PPTP protocol. VPN works over both Wi-Fi and EDGE network connections. Configure VPNChoose General > Network > VPN and tap Settings. Ask your network administrator which settings to use. In most cases, if you've set up VPN on your network, you can use the same VPN settings for iPhone. Turn VPN on or offOnce you've entered VPN settings, a VPN switch appears at the top level of the Settings list. Tap Settings and turn VPN on or off. |
|
Article ID: 306249 | Date Created: August 03, 2007 | Date Modified: September 24, 2007 |