Engineering

Understanding enzyme-substrate interactions is critical in designing strategies for bioconversion of lignocellulosic biomass. In this study we monitored molecular events, in-situ and in real time, including the adsorption and desorption of cellulolytic enzymes on lignin and cellulose by using quartz crystal microgravimetry and surface plasmon resonance. The effect of a non-ionic surface active molecule was also elucidated. Three lignin substrates relevant to the sugar platform in biorefinery efforts were considered, namely, hardwood autohydrolysis cellulolytic (HWAH), hardwood native cellulolytic (MPCEL), and non-wood native cellulolytic (WSCEL) lignin. In addition, Kraft lignins derived from softwoods (SWK) and hardwoods (HWK) were used as references. The results indicated a high affinity between the lignins with both, monocomponent and multicomponent enzymes. More importantly, the addition of non-ionic surfactants at concentrations above their critical micelle concentration reduce...

Block copolymers of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) with varying block sizes were synthesized by consecutive RAFT polymerization and then exposed to cellulose substrates with different anionic charge density. The extent and dynamics of quaternized PDMAEMA-b-POEGMA adsorption on regenerated cellulose, cellulose nanofibrils (CNF) and TEMPO-oxidized cellulose nanofibrils (TOCNF) was determined by using electromechanical and optical techniques, namely quartz crystal microbalance (QCM-D) and surface plasmon resonance (SPR), respectively. PDMAEMA-b-POEGMA equilibrium adsorption increased with the anionic charge of cellulose, an indication of electrostatic interactions. Such observation was further confirmed by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Depending on their architecture, adsorption on TOCNF of some of the PDMAEMA-b-POEGMA copolymers produced a significant reduction in QCM frequency, as expected from large mass uptake, while surprisingly, other copolymers induced the opposite effect. This latter, remarkable behavior was ascribed to coupled water expulsion from the interface upon charge neutralization of anionic surface sites with adsorbing cationic polymer segments. These observations were further investigated with SPR and QCM-D measurements using deuterium oxide solvent exchange to determine the amount of coupled water at the TOCNF-block copolymer interface. Finally, random copolymers with similar composition adsorbed to a larger extent compared to the respective block copolymers, revealing the effect of adsorbed loops and tails as well as hydration.

We evaluated the effect of polyelectrolyte complexes (PEC) with varying balance of charges on the flocculation of precipitated calcium carbonate (PCC) particles. PECs composed of polyacrylamides carrying opposite charges (A-PAM and C-PAM) were investigated in terms of PCC floc shear resistance and re-flocculation effects. Light transmission was used in real time to monitor the dynamics of flocculation under shear fields. Compared to the single polyelectrolytes, PECs greatly enhanced particle re-flocculation while minor differences in shear resistance were observed. Shear resistance and re-flocculation depended strongly on the molecular weight and charge ratio of the PEC components. In order to achieve floc stability and re-flocculation conditions a minimum concentration of charge-asymmetric PEC should be applied.

Cellulose nanofibrils (CNF) were incorporated in water-in-oil (W/O) microemulsions and emulsions, as well as water-in-oil-in-water (W/O/W) multiple emulsions using soybean oil. The addition of CNF to the aqueous phase expanded the composition range to obtain W/O/W emulsions. CNF also increased the viscosity of the continuous phase and reduced the drop size both of which increased the stability and effective viscosity of the emulsions. The effects of oil type and polarity on the properties of the W/O/W emulsions were tested with limonene and octane, which compared to soybean oil produced a smaller emulsion drop size, and thus a higher emulsion viscosity. Overall, CNF are a feasible alternative to conventional polysaccharides as stability enhancers for normal and multiple emulsions that exhibit strong shear thinning behavior.

An instrument was designed and assembled with the aim of measuring macroscopic properties of foams (such as foamability and stability) under high pressures and moderate temperatures (up to 105 bar and 425 K, respectively). The device makes use of infrared sensors to detect the foam forefront position as it is generated by gas sparging in the foaming solution. The measurement

The effect of Fenton's reagent (FR) on surface and dispersion properties of black liquor (BL) was investigated. These properties were compared to those of indulin C (IC), a commercial lignin, and egg lecithin (Le). FR was applied at two different bulk concentrations of H2O2 (160 and 320 mM). At pH 8, a minimum in surface tension for the Fenton treated BL was observed. The dispersant ability of BL, IC and Le in oil-in-water (O/W) emulsions was studied by measuring emulsion stability and drop size. It was found that the surface activity and emulsifying capability of BL were higher than those of IC. The emulsifying capability of Le was improved by the FR treatment at low H2O2 concentration.