Graphite is deprecated (but supported) - new metrics producers are encouraged to use Prometheus
Graphite is a real-time time series data store and graph renderer.
Wikimedia Foundation deploys various web applications that provide convenient ways to access the data or generate graphs.
Service operation
The Graphite receiver for production is hosted on:
Former hosts: graphite1001, tungsten.
Always use graphite-in.eqiad.wmnet as the inbound receiver endpoint for graphite/carbon protocol traffic (i.e. port 2003). This decouples the inbound receiver service from the actual hosting machine allowing safer maintenance operations as well as easier HA/Load balancing. For statsd pushing via udp on port 8125 see the guidelines at statsd.
For Wikimedia Cloud VPS and the Beta Cluster hosted there, the receiver is cloudmetrics1002, with frontends and​. Note that metric names starting with the name of a Cloud VPS project followed by a dot are reserved for server monitoring metrics (collected with Diamond). Other metrics in this namespace may be automatically deleted without notice. For example, if your project is called "foo", use foo_extrametrics.bar_baz instead of foo.bar_baz.
Metric creation
Graphite does not have a procedure for creating or registering metrics. Instead, Graphite clients can submit data for any metric by name, and the metric is created automatically in storage backend.
Everything stored in graphite has a path with components delimited by dots. In a path such as, each segment surrounded by dots is called a path component. So "foo" is a path component, as well as "bar", etc. When coming up with metric names, adhere to the following guidelines:
Each path component should have a clear and well-defined purpose.
Volatile path components should be kept as deep into the hierarchy as possible.
The automatic creation of metrics avoids overhead of configuration, but also means metric name fields should not be publicly exposed to user input. This is instead the responsibility of Graphite clients. For a list of Graphite clients in use at Wikimedia Foundation, see #Data sources.
Data sources
Graphite is one of the primary aggregators for metrics at Wikimedia Foundation. It providers a powerful API to query, transform, and aggregate the data.
Data is usually not submitted to Graphite directly. Instead, it should go through one of the below clients. The most commonly used client is Statsd.
See also: statsd
The Statsd server acts as an intermediary between Graphite and other applications.
Data submitted via Statsd uses the raw metric name from Statsd as-is inside Graphite. No prefix or namespace is added by default. However, Statsd does add #Extended properties to your metrics.
To aggregate data from EventLogging events from client-side JavaScript, we usually create a Python deamon that subscribes to relevant EventLogging topics in Kafka, that reacts by sending packets to Statsd. See EventLogging for how to create new schemas.
statsv is an HTTP beacon endpoint (/beacon/statsv) for sending data to Graphite via statsd.
Data pipeline (simplified):
HTTP -> Varnish -> Kafka -> -> statsd -> Graphite
It's a lightweight way of sending data from clients. This is useful when you only require one or more values to be aggregated, without needing the overhead of an EventLogging schema or storing each entry in a relational database.
You can hit this endpoint directly with an HTTP request.
Within MediaWiki, you should use the abstraction layer provided by the WikimediaEvents extension. Like so:
mw.track( 'timing.MediaWiki.foo_bar', 1234.56 ); // milliseconds mw.track( 'counter.MediaWiki.foo_quux', 1 ); // increment
Use the "timing" and "counter" topic namespace of mw.track (documentation). Note that a prefix is not automatically added. So for metrics relating to MediaWiki core or a MediaWiki extension, be sure to prefix under "MediaWiki." (per $wgStatsdMetricPrefix ). Likewise, for using statsv from other applications (EventLogging, and Zuul are examples), be sure to include a namespace for the application.
Use MediaWiki's MediaWikiServices::getInstance()->getStatsdDataFactory() interface. This buffers data within the process, and sends it to Statsd at the end.
Note that properties from MediaWiki automatically get the MediaWiki. prefix added to the metric name (configurable with $wgStatsdMetricPrefix​).
To record data to Graphite directly, the client must send a message over TCP to port 2003 that will contains three space separated entries:
  1. Metric name.
  2. Integer value.
  3. Unix timestamp.
$ echo "example.metric 1911 $(date +%s)" | nc -q0 graphite-in.eqiad.wmnet 2003
Extended properties
This is the missing manual about aggregation by Statsd and Graphite, at Wikimedia. This describes the primary metric types we use: counters and timers. For other metric types, see Statsd Documentation: Metric Types.
A simple counter that resets after each interval. Aggregation layers will combine values using sum().
A single push can increment the counter with any positive number. Incrementing by 1 is most common in application code, however aggregation may happen within your application or at other layers in-between the application and Graphite. As such, Statsd may see your increments as higher than 1.
Recommended properties:
Discouraged properties:
Track the duration of a particular event. Recommended properties:
Discouraged properties:
Here is a short list of common functions you should know about.
See summarize in the Graphite manual.
For graphs showing the history of a metric over the course of several weeks or months it can be helpful to summarise data points to a higher interval to help hide normal variation. For example, it's much easier to see a regression from ~ 10 to ~ 20 on a straight line than a line that continuously wiggles between 1 and 30. Even after aggregation into a median and application of moving average, data can still exhibit a wide variation over longer periods of time.
summarize() helps you plot very bold and spaced out data points onto a graph. For example, one value per hour, day, or week. To emphasise changes in the metric more prominently, the "staircase" line mode can be used in addition to this.
See the "History" panel on the Navigation Timing dashboard for an example of the summarize() function.
See aliasByNode in the Graphite manual.
For longer metric paths, this function can help shorten the labels in the legend. Its benefit over assigning labels manually with alias() is that it is automatically derived from the metric path (avoids the label from becoming incorrect when the metric path is changed). It also has the benefit of deriving short names for a series containing multiple metrics, without having to name each metric separately.
As of October 2018 the main components of the Graphite stack are:
statsd ingestion
statsd UDP traffic is ingested through the statsd.eqiad.wmnet DNS name on port 8125, this is all statsd traffic that needs global aggregation and by far the most widespread protocol for pushing metrics at WMF. Statsd metrics sent there to the global aggregato will produce values aggregated across all hosts that sent said metrics. For example mediawiki statsd metrics are aggregated globally, i.e. the metric name doesn't contain the host name sending the metric.
For statsd metrics where global aggregation is not desired or needed the recommended approach is to run a local statsd aggregator (in our case statsite) and point the application to localhost:8125 instead. Such cases are for example Swift metrics, any application that generates metrics including the hostname is a candidate for a local statsd aggregator. The results are going to be the same as if the metrics were aggregated globally while putting less stress on the global aggregator.
Note that if an application sends a mixture of hostname-specific metrics and global metrics then it should use statsd.eqiad.wmnet.
After aggregation is done, either local or global, the resulting metrics are flushed to Graphite using the Carbon protocol over TCP.
carbon ingestion
The Graphite protocol is called Carbon and it is TCP-based and line oriented, metrics have a name, a value and a timestamp. No metric data types are possible like in statsd. The entry point for carbon traffic is graphite-in.eqiad.wmnet DNS name on port 2003, said traffic will hit the carbon frontend relay component, implemented by the carbon-c-relay software. Once the frontend has accepted the metrics, they will be mirrored to all datacenters where graphite is present (eqiad and codfw as of October 2018) and received by the carbon local relay (also implemented by carbon-c-relay) for storage on disk.
HTTP read-only API
Once stored on disk the metrics are served by graphite-web as a uwsgi application via HTTP. The web application is what powers the Grafana backend for Graphite and​, it will query for metrics from all graphite hosts local to its datacenter and serve the resulting data.
How do I render a counter metric as running total?
Start the sum property which stores the total per interval (e.g. minute or hour). Then apply
to produce a running total. (Original discussion at T108480)
Why is the data so different when zooming out or moving a week back?
This is most likely a side-effect from a graph using .count or .sum where .rate should be used instead. See Extended properties for how to resolve this.
Operations manual
When needing to failover traffic from one graphite host to another it is important to think about such traffic in terms of read and write traffic.
Read traffic: all reads happen via HTTP and graphite is fronted by Varnish, thus a change like 454876 is sufficient to switch read traffic.
Write traffic: write traffic is trickier, as it involves changing multiple entry points. Additional complication is brought by the fact that some clients will ignore DNS records changes and thus will need to be restarted.
Monitor graphite queries
The graphite web application graphite-web does a fair amount of logging, specifically inside /var/log/graphite-web/metricaccess.log and /var/log/graphite-web/rendering.log​. All requested queries are logged together with how much time it spent serving those.
Deleting metrics
There's no (as of Nov 2016) formal/periodic clean up of old or unwanted/unneeded metrics. To get a metrics deleted please file a Phabricator task under #Graphite.
For people with access to graphite: to delete metrics find first (as user _graphite) the correct files/directories under /var/lib/carbon/whisper from graphite1004.eqiad.wmnet and graphite2003.codfw.wmnet. Then add -delete when the list of metrics matches what you expect. If you are unsure which hosts are active graphite hosts, check puppet's manifests/site.pp for hosts with graphite::production role. It is recommended to run find/delete on the standby host first (usually the host in codfw) and then on the active host.
For example,
sudo -u _graphite find /var/lib/carbon/whisper/Mediawiki/CodeMirror -name "*.wsp" -delete
rsync metrics
Graphite machines run an rsync server to make metrics accessible to other graphite machines in case manual sync is needed (e.g. after machine failure). To rsync in parallel, first sync only top-level directories and then the contents in parallel:
install -d -o _graphite -g _graphite /var/lib/carbon/whisper su -s /bin/bash _graphite cd /var/lib/carbon/whisper rsync -vd SOURCE::carbon/whisper/ . /usr/bin/time parallel -j5 -i rsync -a SOURCE::carbon/whisper/{}/ {}/ -- *
Merge and sync metrics
The rsync method above provides a "point in time" sync. Another possibility albeit slower is to sync and merge metrics from a machine onto another one. Thanks to carbonate this is possible to do in the background, where metrics are rsync'd from an host and then merged onto existing ones. Using this method the metrics files are locked during merge and thus can it be used to fill "holes" even when the destination machine is actively being written to. The carbonate package is needed (available internally on stretch) together with time and GNU parallel.
export CARBONATE_CONF=/etc/carbon/carbonate.conf (cd /srv/carbon/whisper ; find . -type f | carbon-path -r) | time parallel --files --jobs 10 --pipe --block 20k -- carbon-sync -s SOURCE -d /srv/carbon/whisper --source-storage-dir :carbon/whisper -l
List slow queries
Graphite's web application logs how long a given query took, you can list all queries taking over a certain amount of time (in seconds) with:
awk -Ftook '$2 > 10 { print }' /var/log/graphite-web/rendering.log
Note that a slow query isn't necessary the cause of a slowdown, it might be a consequence
List metrics being created
tail -F /var/log/carbon/carbon-cache@*/creates.log | grep 'matched schema'
Operations troubleshooting
carbon-cache too many creates
This alert is used to signal whenever too many files (and therefore disk space) are being created on disk. It can be benign, e.g. when a new cassandra instance gets bootstrapped there is a flood of new metrics being created. To check which files are being created:
sudo tail -F /var/log/upstart/carbon_cache-*.log /var/log/carbon/carbon-cache@*/creates.log | grep 'creating database file'
It is also useful to tally which metrics have been created according to "top level" (i.e. the leftmost component)
sudo grep 'aggregation schema' /var/log/carbon/carbon-cache@*/creates.log* | awk '{print $6}' | cut -d. -f1 | sort | uniq -c | sort -rn | less
Applying carbon storage_aggregation changes
The current settings are only used when creating new Whisper data sets. Existing ones will generally not be affected. To apply, say, newer xFilesFactor configuration to an existing property, use the following steps.
While there is no script to read the current would-be settings and apply them, there is a script to manually apply specific settings.
  1. Get new xFilesFactor settings for the relevant metric from puppet:/role/graphite/base.pp​. For example: "0.01" or "0".
  2. Get new retention settings from puppet:/role/graphite/base.pp​. For example: "​1m:7d,5m:14d,15m:30d,1h:1y,1d:5y​".
  3. Check current settings:
    $ whisper-info mw/js/deprecate/tipsy_live/sum.wsp
    xFilesFactor: 0.0
  4. $ sudo -su _graphite (or whichever user is the owner of the wsp file)
  5. Run whisper-resize and set xFilesFactor, then the path, and then the retention values as distinct space-separated command-line arguments:
    $ whisper-resize --xFilesFactor=0 mw/js/deprecate/tipsy_live/sum.wsp 1m:7d 5m:14d 15m:30d 1h:1y 1d:5y
  6. Remember to run it on both Eqiad and Codfw primary Graphite hosts (as of July 2018: graphite1004.eqiad.wmnet and graphite2003.codfw.wmnet).
Identifying heavy and/or expensive queries
Graphite might suffer from heavy CPU or memory load if queries requesting a lot of data are run. It is possible to identify those after the fact by asking uwsgi for big (as in bytes) or long (as in milliseconds) queries by awk-ing the request logs. See also bug T116767 e.g.
# filter for >5MB responses tail -F /var/log/uwsgi-graphite-web.log | awk '$26 > 5000000 {print }' | less # filter for > 9s responses tail -F /var/log/uwsgi-graphite-web.log | awk '$29 > 9000 {print }'
uwsgi can also dump a bunch of stats and info about pending requests (note that this outputs to stderr):
sudo uwsgi --connect-and-read /run/uwsgi/graphite-web-stats.sock |& less
Further reading
External links
Graphite configuration, Wikimedia operations puppet
See also for product analytics purposes
Last edited on 4 September 2021, at 18:47
Content is available under CC BY-SA 3.0 unless otherwise noted.
Privacy policy
Terms of Use
 Home Random Log in  Settings  Donate  About Wikitech  Disclaimers